Release Notes & Upgrade Guides > AssemblyScript Migration Guide

AssemblyScript Migration Guide

Reading time: 10 min

Up until now, subgraphs have been using one of the first versions of AssemblyScript (v0.6). Finally we've added support for the newest one available (v0.19.10)! 🎉

That will enable subgraph developers to use newer features of the AS language and standard library.

This guide is applicable for anyone using graph-cli/graph-ts below version 0.22.0. If you're already at a higher than (or equal) version to that, you've already been using version 0.19.10 of AssemblyScript 🙂

Note: As of 0.24.0, graph-node can support both versions, depending on the apiVersion specified in the subgraph manifest.

Features

Link to this section

New functionality

Link to this section
  • TypedArrays can now be built from ArrayBuffers by using the new wrap static method (v0.8.1)
  • New standard library functions: String#toUpperCase, String#toLowerCase, String#localeCompareand TypedArray#set (v0.9.0)
  • Added support for x instanceof GenericClass (v0.9.2)
  • Added StaticArray<T>, a more efficient array variant (v0.9.3)
  • Added Array<T>#flat (v0.10.0)
  • Implemented radix argument on Number#toString (v0.10.1)
  • Added support for separators in floating point literals (v0.13.7)
  • Added support for first class functions (v0.14.0)
  • Add builtins: i32/i64/f32/f64.add/sub/mul (v0.14.13)
  • Implement Array/TypedArray/String#at (v0.18.2)
  • Added support for template literal strings (v0.18.17)
  • Add encodeURI(Component) and decodeURI(Component) (v0.18.27)
  • Add toString, toDateString and toTimeString to Date (v0.18.29)
  • Add toUTCString for Date (v0.18.30)
  • Add nonnull/NonNullable builtin type (v0.19.2)

Optimizations

Link to this section
  • Math functions such as exp, exp2, log, log2 and pow have been replaced by faster variants (v0.9.0)
  • Slightly optimize Math.mod (v0.17.1)
  • Cache more field accesses in std Map and Set (v0.17.8)
  • Optimize for powers of two in ipow32/64 (v0.18.2)
  • The type of an array literal can now be inferred from its contents (v0.9.0)
  • Updated stdlib to Unicode 13.0.0 (v0.10.0)

How to upgrade?

Link to this section
  1. Change your mappings apiVersion in subgraph.yaml to 0.0.6:
...
dataSources:
...
mapping:
...
apiVersion: 0.0.6
...
  1. Update the graph-cli you're using to the latest version by running:
# if you have it globally installed
npm install --global @graphprotocol/graph-cli@latest
# or in your subgraph if you have it as a dev dependency
npm install --save-dev @graphprotocol/graph-cli@latest
  1. Do the same for graph-ts, but instead of installing globally, save it in your main dependencies:
npm install --save @graphprotocol/graph-ts@latest
  1. Follow the rest of the guide to fix the language breaking changes.
  2. Run codegen and deploy again.

Breaking changes

Link to this section

Nullability

Link to this section

On the older version of AssemblyScript, you could create code like this:

function load(): Value | null { ... }
let maybeValue = load();
maybeValue.aMethod();

However on the newer version, because the value is nullable, it requires you to check, like this:

let maybeValue = load()
if (maybeValue) {
maybeValue.aMethod() // `maybeValue` is not null anymore
}

Or force it like this:

let maybeValue = load()! // breaks in runtime if value is null
maybeValue.aMethod()

If you are unsure which to choose, we recommend always using the safe version. If the value doesn't exist you might want to just do an early if statement with a return in you subgraph handler.

Variable Shadowing

Link to this section

Before you could do variable shadowing and code like this would work:

let a = 10
let b = 20
let a = a + b

However now this isn't possible anymore, and the compiler returns this error:

ERROR TS2451: Cannot redeclare block-scoped variable 'a'
let a = a + b;
~~~~~~~~~~~~~
in assembly/index.ts(4,3)

You'll need to rename your duplicate variables if you had variable shadowing.

Null Comparisons

Link to this section

By doing the upgrade on your subgraph, sometimes you might get errors like these:

ERROR TS2322: Type '~lib/@graphprotocol/graph-ts/common/numbers/BigInt | null' is not assignable to type '~lib/@graphprotocol/graph-ts/common/numbers/BigInt'.
if (decimals == null) {
~~~~
in src/mappings/file.ts(41,21)

To solve you can simply change the if statement to something like this:

if (!decimals) {
// or
if (decimals === null) {

The same applies if you're doing != instead of ==.

The common way to do casting before was to just use the as keyword, like this:

let byteArray = new ByteArray(10)
let uint8Array = byteArray as Uint8Array // equivalent to: <Uint8Array>byteArray

However this only works in two scenarios:

  • Primitive casting (between types such as u8, i32, bool; eg: let b: isize = 10; b as usize);
  • Upcasting on class inheritance (subclass → superclass)

Examples:

// primitive casting
let a: usize = 10
let b: isize = 5
let c: usize = a + (b as usize)
// upcasting on class inheritance
class Bytes extends Uint8Array {}
let bytes = new Bytes(2)
// <Uint8Array>bytes // same as: bytes as Uint8Array

There are two scenarios where you may want to cast, but using as/<T>var isn't safe:

  • Downcasting on class inheritance (superclass → subclass)
  • Between two types that share a superclass
// downcasting on class inheritance
class Bytes extends Uint8Array {}
let uint8Array = new Uint8Array(2)
// <Bytes>uint8Array // breaks in runtime :(
// between two types that share a superclass
class Bytes extends Uint8Array {}
class ByteArray extends Uint8Array {}
let bytes = new Bytes(2)
// <ByteArray>bytes // breaks in runtime :(

For those cases, you can use the changetype<T> function:

// downcasting on class inheritance
class Bytes extends Uint8Array {}
let uint8Array = new Uint8Array(2)
changetype<Bytes>(uint8Array) // works :)
// between two types that share a superclass
class Bytes extends Uint8Array {}
class ByteArray extends Uint8Array {}
let bytes = new Bytes(2)
changetype<ByteArray>(bytes) // works :)

If you just want to remove nullability, you can keep using the as operator (or <T>variable), but make sure you know that value can't be null, otherwise it will break.

// remove nullability
let previousBalance = AccountBalance.load(balanceId) // AccountBalance | null
if (previousBalance != null) {
return previousBalance as AccountBalance // safe remove null
}
let newBalance = new AccountBalance(balanceId)

For the nullability case we recommend taking a look at the nullability check feature, it will make your code cleaner 🙂

Also we've added a few more static methods in some types to ease casting, they are:

  • Bytes.fromByteArray
  • Bytes.fromUint8Array
  • BigInt.fromByteArray
  • ByteArray.fromBigInt

Nullability check with property access

Link to this section

To use the nullability check feature you can use either if statements or the ternary operator (? and :) like this:

let something: string | null = 'data'
let somethingOrElse = something ? something : 'else'
// or
let somethingOrElse
if (something) {
somethingOrElse = something
} else {
somethingOrElse = 'else'
}

However that only works when you're doing the if / ternary on a variable, not on a property access, like this:

class Container {
data: string | null
}
let container = new Container()
container.data = 'data'
let somethingOrElse: string = container.data ? container.data : 'else' // doesn't compile

Which outputs this error:

ERROR TS2322: Type '~lib/string/String | null' is not assignable to type '~lib/string/String'.
let somethingOrElse: string = container.data ? container.data : "else";
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To fix this issue, you can create a variable for that property access so that the compiler can do the nullability check magic:

class Container {
data: string | null
}
let container = new Container()
container.data = 'data'
let data = container.data
let somethingOrElse: string = data ? data : 'else' // compiles just fine :)

Operator overloading with property access

Link to this section

If you try to sum (for example) a nullable type (from a property access) with a non nullable one, the AssemblyScript compiler instead of giving a compile time error warning that one of the values is nullable, it just compiles silently, giving chance for the code to break at runtime.

class BigInt extends Uint8Array {
@operator('+')
plus(other: BigInt): BigInt {
// ...
}
}
class Wrapper {
public constructor(public n: BigInt | null) {}
}
let x = BigInt.fromI32(2)
let y: BigInt | null = null
x + y // give compile time error about nullability
let wrapper = new Wrapper(y)
wrapper.n = wrapper.n + x // doesn't give compile time errors as it should

We've opened a issue on the AssemblyScript compiler for this, but for now if you do these kind of operations in your subgraph mappings, you should change them to do a null check before it.

let wrapper = new Wrapper(y)
if (!wrapper.n) {
wrapper.n = BigInt.fromI32(0)
}
wrapper.n = wrapper.n + x // now `n` is guaranteed to be a BigInt

Value initialization

Link to this section

If you have any code like this:

var value: Type // null
value.x = 10
value.y = 'content'

It will compile but break at runtime, that happens because the value hasn't been initialized, so make sure your subgraph has initialized their values, like this:

var value = new Type() // initialized
value.x = 10
value.y = 'content'

Also if you have nullable properties in a GraphQL entity, like this:

type Total @entity {
id: Bytes!
amount: BigInt
}

And you have code similar to this:

let total = Total.load('latest')
if (total === null) {
total = new Total('latest')
}
total.amount = total.amount + BigInt.fromI32(1)

You'll need to make sure to initialize the total.amount value, because if you try to access like in the last line for the sum, it will crash. So you either initialize it first:

let total = Total.load('latest')
if (total === null) {
total = new Total('latest')
total.amount = BigInt.fromI32(0)
}
total.tokens = total.tokens + BigInt.fromI32(1)

Or you can just change your GraphQL schema to not use a nullable type for this property, then we'll initialize it as zero on the codegen step 😉

type Total @entity {
id: Bytes!
amount: BigInt!
}
let total = Total.load('latest')
if (total === null) {
total = new Total('latest') // already initializes non-nullable properties
}
total.amount = total.amount + BigInt.fromI32(1)

Class property initialization

Link to this section

If you export any classes with properties that are other classes (declared by you or by the standard library) like this:

class Thing {}
export class Something {
value: Thing
}

The compiler will error because you either need to add an initializer for the properties that are classes, or add the ! operator:

export class Something {
constructor(public value: Thing) {}
}
// or
export class Something {
value: Thing
constructor(value: Thing) {
this.value = value
}
}
// or
export class Something {
value!: Thing
}

Array initialization

Link to this section

The Array class still accepts a number to initialize the length of the list, however you should take care because operations like .push will actually increase the size instead of adding to the beginning, for example:

let arr = new Array<string>(5) // ["", "", "", "", ""]
arr.push('something') // ["", "", "", "", "", "something"] // size 6 :(

Depending on the types you're using, eg nullable ones, and how you're accessing them, you might encounter a runtime error like this one:

ERRO Handler skipped due to execution failure, error: Mapping aborted at ~lib/array.ts, line 110, column 40, with message: Element type must be nullable if array is holey wasm backtrace: 0: 0x19c4 - <unknown>!~lib/@graphprotocol/graph-ts/index/format 1: 0x1e75 - <unknown>!~lib/@graphprotocol/graph-ts/common/collections/Entity#constructor 2: 0x30b9 - <unknown>!node_modules/@graphprotocol/graph-ts/global/global/id_of_type

To actually push at the beginning you should either, initialize the Array with size zero, like this:

let arr = new Array<string>(0) // []
arr.push('something') // ["something"]

Or you should mutate it via index:

let arr = new Array<string>(5) // ["", "", "", "", ""]
arr[0] = 'something' // ["something", "", "", "", ""]

GraphQL schema

Link to this section

This is not a direct AssemblyScript change, but you may have to update your schema.graphql file.

Now you no longer can define fields in your types that are Non-Nullable Lists. If you have a schema like this:

type Something @entity {
id: Bytes!
}
type MyEntity @entity {
id: Bytes!
invalidField: [Something]! # no longer valid
}

You'll have to add an ! to the member of the List type, like this:

type Something @entity {
id: Bytes!
}
type MyEntity @entity {
id: Bytes!
invalidField: [Something!]! # valid
}

This changed because of nullability differences between AssemblyScript versions, and it's related to the src/generated/schema.ts file (default path, you might have changed this).

  • Aligned Map#set and Set#add with the spec, returning this (v0.9.2)
  • Arrays no longer inherit from ArrayBufferView, but are now distinct (v0.10.0)
  • Classes initialized from object literals can no longer define a constructor (v0.10.0)
  • The result of a ** binary operation is now the common denominator integer if both operands are integers. Previously, the result was a float as if calling Math/f.pow (v0.11.0)
  • Coerce NaN to false when casting to bool (v0.14.9)
  • When shifting a small integer value of type i8/u8 or i16/u16, only the 3 respectively 4 least significant bits of the RHS value affect the result, analogous to the result of an i32.shl only being affected by the 5 least significant bits of the RHS value. Example: someI8 << 8 previously produced the value 0, but now produces someI8 due to masking the RHS as 8 & 7 = 0 (3 bits) (v0.17.0)
  • Bug fix of relational string comparisons when sizes differ (v0.17.8)
Edit page

Previous
How to Secure API Keys Using Next.js Server Components
Next
GraphQL Validations migration guide
Edit page